Cedar Adirondack chairs – Reuse of cedar planks to build Adirondack chairs and other outdoor furniture has the added benefit of natural weather-proofing. Remove nails, screws, staples and other metal fasteners from each plate. Use a metal detector, if you have access to ensure you do not miss anything. Clean the timber. If you are planning to sand the boards, use a pressure washer or scrub the boards using a brush and soapy water.
Dry the timber when cleaning with water, or if it was stored outside, by laying the panels flat on a dry, warm place for several days. Moisture in the wood caused the swelling of exposure to moisture and heat. Drying minimizes this effect. Plane the wood edges are uneven. Plates with straight sides are much easier to measure and match, although armrests can be left in a more rustic state of cedar Adirondack chairs.
12 Photos Gallery of: Make Cedar Adirondack Chairs from Planks
Sand the wood, if desired, by hand or with a sander. To keep a rustic look, use a finer grit paper and sand just enough to smooth to prevent splinters the raised portions of the plates. If a smoother finish is required, start with a large grain paper for the first sanding. Paints or stains the cedar Adirondack chairs, if desired, although cedar does not require any protection from the elements.