Modern filing cabinet – The use of binders to make a table has a couple of advantages: additional storage space in the cabinets is obtained, and construction is very simple. Make use of modern filing cabinet are the right height for the table you want – around 28 to 30 inches high is usually ideal. If you use a flat panel door made by the surface of the table, you have to make any cut at all, and you can ride your filing cabinet table soon.
Paint your two modern filing cabinet and the door to be used as the surface of the table if desired. Paint the table elements separately is much simpler than painting table once mounted. Place a support angle about 4 to 5 inches from each corner of the cabinets, on the sides. The angle of each bracket must be exactly level with the top of the cabinets, with the horizontal support arm in the same plane as the top of the cabinet. Mark the positions of the screw holes in the brackets with a marker and remove the brackets for the moment.
12 Photos Gallery of: DIY Table modern filing cabinet
Make a pilot hole through each of the positions of the screw holes marked. Put the angle brackets back into position, and then burst into an anchor screw into each hole before securing brackets in place with screws through the screw holes in the studs. Place the two modern filing cabinet where you want the table to go, wide enough apart to the top of the table fit door between them about 10 centimeters above the outside of each file. Place the door on top of the cabinets. Secure the door cabinets with screws driven through the screw holes in the horizontal arm of the angle brackets at the bottom of the door.