Patio furniture sectional – Most sectional sofas come with connecting hardware that keeps distancing sections. This is especially important if you have a hardwood or vinyl flooring with less friction. Determining how to use this hardware will allow you to rearrange more frequently sectional and secure so that no spaces between sections. There are several different types of cross connecting hardware, including zippers and snaps.
Connecting hardware patio furniture sectional, Snap Hardware connection, Observe the hardware to determine if you have the hardware snap. Hardware Snap usually found at the bottom of the furniture. One end of the hardware is a pin protruding from the sofa, while the other end has two long serrated tips that resemble an alligator or tuning fork. Turn the fork – shaped end of under the sofa. Push sections close enough to stick lines up between the two prongs of the fork. Push the sections together. You will hear many snaps as you push. This is the PEG break past the teeth at the other end. Press until the two pieces of hardware are tight and the two pieces of furniture are aligned.
12 Photos Gallery of: Connecting Hardware Patio Furniture Sectional
Brooch hardware connection, Find on the side of your couch to determine whether you have the hardware connection bracket. Clasp connections are usually on the center side of the Connecting hardware patio furniture sectional. A hardware side is up, while the other is oriented downward. Push the two pieces as close as possible. Be sure to align the pieces so the hardware is touching. Lift the piece of hardware section facing downward several inches and drag it slightly so that is above the hardware facing. Gently down the furniture for the hardware interlocks. Be careful not to move too fast you can rip the upholstery.