Staining Rustic Knotty Alder Cabinets

Feb 15th

Staining Rustic Knotty Alder Cabinets – If you want rustic knotty alder for renovations your cabinets, staining is not a difficult process, but to get good results, you cannot just brush, then wipe away the stain. You must first sharpen wood and then finalize the preparations needed to get the most out of your wood stain.

Top Rustic Knotty Alder Cabinets

To staining rustic knotty alder cabinets, the first sand the surface with sandpaper knotty alder between 150 and 220 grit to open the pores of the wood. The coarse sandpaper, the more pores you will open. This will give you a rustic look to your cabinets. If you want a refined look, use finer sandpaper. Wipe cabinets down with a clean cotton cloth dampened with white spirit. This removes dust from the pores. The mineral spirits also helps to raise the fibers of the wood. This helps the wood to accept stain better. Allow the wood several minutes to dry to its natural color.

12 Photos Gallery of: Staining Rustic Knotty Alder Cabinets

Image of: Awesome Rustic Knotty Alder Cabinets
Image of: Best Rustic Knotty Alder Cabinets
Image of: Fantastic Rustic Knotty Alder Cabinets
Image of: Knotty Alder Cabinets
Image of: Picture Of Rustic Knotty Alder Cabinets
Image of: Rustic Knotty Alder Cabinets Color
Image of: Rustic Knotty Alder Cabinets Dark Stain
Image of: Rustic Knotty Alder Cabinets Ideas
Image of: Rustic Knotty Alder Cabinets Painted Dark
Image of: Rustic Knotty Alder Cabinets Photos
Image of: Rustic Knotty Alder Cabinets
Image of: Top Rustic Knotty Alder Cabinets
 
READ  Considering the Best Design of Resin Storage Cabinets

Apply the stain of even strokes with a brush or sponge to staining knotty alder cabinets. Overlap strokes by 50 percent to ensure adequate coverage. Wipe the stain off after about 30 minutes with a clean cotton cloth. If you leave the patch on for a short period, the stain will appear more transparent and more wood grain will shine through for a rustic feel. If you leave a stain on the longer, the color of the wood darkens and provides a solid appearance. Add a second coat of paint just as you added first if you want a darker look.