Contemporary executive desk – A desk is one of the most important pieces of furniture in an office. Whether for a home office or an office building, you want the best at an affordable price. This project requires a solid foundation in the woodworking skills along with experience of power tools. Place all the material from the list under “Pedestal base” on a desk. Apply glue to the ends of the 26¼-inch pieces, place them between pieces of 16-inch and secure with finishing nails. Place the two pieces that 26¼x14½ within the frames and secure with finishing nails. Place the four pieces of plywood that 16½x29¾ on the table. These are the top and bottom of the drawer cabinets. Installing KV drawer slides inside end panels according to the manufacturer’s instructions.
The drawer fronts for this contemporary executive desk will be flush with the front of the cabinets. Apply glue to the edges of one 29¾ inches and place it between the bottom and the two inch pieces (20¾x29¾ the end panels). Secure with finishing nails. Place another on top of the final panel and secure with finishing nails. Repeat with remaining pieces of the drawer cabinet. Place the two cabinets of Step 2 separated from each other so that is not including 30 inches. Place 27½x66x¾ inch plywood oak (again) on top of the cabinets. Adjust the setting so that 66 inches again flush with the top and side of the drawer cabinets.
12 Photos Gallery of: How to Build a Contemporary Executive Desk
Remove the back, apply glue to the edges and ensure a return to the cabinet drawers with finishing nails. Iron in the strip edge 1×30 inches from the ends of the back. Break the folding excess over the bottom edge of the sandbox and excess edges with a sanding block. Place the contemporary executive desk to which the bottoms of drawer cabinets are looking up. Place pedestals funds drawer cabinets so they are flush with the side of the knee space cabinets and against the back. Trace a line around the perimeter of the pedestal and remove them. Apply glue inside the drawing, replace and secure the pedestals with drywall screws. No countersink the drywall screws.