Curved patio furniture – A garden bench basic works well in the garden and on the patio. It can provide seats while working in the garden. You can create additional seat patio or even serve as an end table. Materials can be as relaxed or as formal as you want. Hardwood is good for a traditional bank seeks and pressure-treated wood contributes to more than a homemade look. Remember, when always build wooden furniture that is used outdoors, apply some type of finish to protect the surface of the elements.
Curved patio furniture, measure and mark two boards 2-inch-by-6-inch-by-8-foot three pieces each 45 inches long. Place glasses. Set a circular saw. Cut along the marked areas on wood. Take one of the 45-inch boards and draw a freehand arc that is 3 inches high in the center. Set a jig saw and cut along the arc. Sand all cut wood surfaces with 80-grit sandpaper.
12 Photos Gallery of: Garden Bench Curved Patio Furniture
Curved patio furniture stack two wrenches leg over leg and align the edges. Drill through all the pieces of wood with a 3/8 inch drill bit. Repeat with the other three legs. Place one of the keys leg on a flat surface and accumulate a carriage bolt through the hole. Add to this one of the legs and top with another leg brace. Repeat with the other three legs and do not tighten the screws until both legs are attached to a set of keys.