Lockable storage cabinets – Find a blind hole in the cabinet DVD. Some cabinets come with a small pre-made for installing a lock hole. This hole is usually at the top of the unit or in the middle of the door. Create your own keyhole at the top or in the middle of one of the cabinet doors DVD if there is no pre-made hole. Use a drill bit that is slightly smaller than the diameter of the lock to be installed or use a small drill to carve a hole that is slightly smaller than the diameter of the s ™ € Locke. Take the lock bolt or piece of metal protruding from the lock cylinder of the lock of the back of the cam lock. Push the lockable storage cabinet’s cylinder came into the hole drilled with the key up into the lock.
Hold the cam lock in place and slide the belt clip into the slots in the lock cylinder to maintain the blockade firmly in place. Secure the lock bolt in the rear of the cylinder cam lock so that the piece of metal is up. Install the lock catch on the inside of the closet door opposite. Follow the instructions that come with the cam lock is to be installed in particular to determine how far into the closet door catch needs to be installed. Most locking catches are simply screwed into place. Close the door of lockable storage cabinets and turn the key. The piece of metal in the lock bolt should be placed in the lock catch, keeping the door closed.
12 Photos Gallery of: DVD Lockable Storage Cabinets
Best Style Lockable Storage Cabinets
Lockable storage cabinets – When you buy lockable storage cabinets supplier, which often come with a frame of wooden box, which is the lockable storage cabinets body, or wooden panels you should join as a picture. Often, it is your responsibility to install the storage enclosure to a wall, for example, and attach the closet door. To hang a storage cabinet to a wall mirror a floating cabinet, you ensure that the wall can support the lockable storage cabinets by finding the wall studs in the wall.
Place locator wall studs in the wall where the lockable storage cabinets is installed. Slide horizontally across the wall slowly and stop when it beeps. Use the stylus to make a mark on the wall when the beam detector beeps. Continue until you have found at least two wall studs for installation. Wall studs run vertically on the wall, so ensure that drag the device horizontally. Measure the distance between the two wall studs with a tape using the marks you made.
Use the mechanical screwdriver to screw the 3 – inch long screws through the back of the cabinet. The screws should protrude from the back of the cabinet. Use the mechanical screwdriver to secure the lockable storage cabinets to the wall. Have a friend help storage cabinet is maintained while installed on the wall if it is heavy. After installing the two original screws on the two wall studs, add four additional screws vertically below the original two screws using the mechanical screwdriver. There should be two rows of three screws in the lockable storage cabinets. Make sure you have the storage cabinet installed properly before storing objects in the cabinet.