An Lshaped desk is a particular door design which fits in an angle of 90 degrees, which is normal for L-shaped work desk. People who have an L-shaped cabinet or rack cabinet may wish under the desk surface to hide the box with a specially designed cabinet door for the 90-degree angle. Measure the dimensions of the corner cabinet frame and write the width and height numbers down. Measure the length of the two corner cabinet openings, since the L-shaped opening cabinet may differ in length. Among others, the frame panels in the length measurements. Moreover, the total height measurement of the corner cabinet, including the frame panels, so that the L-shaped corner cover the door panels after installation.
Place the plywood down so you have the two panels needed for an Lshaped desk door draw. Grab the pencil and ruler to draw two panels. The panels should measure the overall height and the respective width of the corner unit. Subtraction 1/2 inch from the width dimension of one of the door panels, so at the 1/2-inch-thick overlapping panel do not change the modified L-shaped cabinet door.
12 Photos Gallery of: DIY Lshaped Desk Door
Create an Lshaped desk or cabinet door for your desk by placing the two panels at right angles next to each other. Make sure that the changed piece is overlapped by the other piece, which means that on the 1/2-inch thick 1/2 inch cabinet door adds to the custom door panel. Drill 1-inch-long screws by a single door panel with the aid of the cordless drill. The screws have to extend in the second door panel so that an L-shaped door structure.