Building Swivel Lounge Chair

Apr 29th

Swivel lounge chair – foundations of the development of a swivel chair are simple. There are six main parts in a swivel chair. From there it becomes a puzzle to fit the pieces together to make a complete chair. Gather all the things you need, and if there’s anything you have not, you can buy at almost any hardware store.

Kinkou Swivel Lounge Chair

Swivel lounge chair, lightly grease the gas cylinder and start assembling the kit bearing on the gas cylinder. There will be about six washers, and must be greased before you can attach to your gas cylinder. Start with rubber cushion, and follow up with the washer 15/16 inches. Now apply the bearing, which usually has five small balls in it. After the rolling, place a generous application of grease around the bearing lubrication. Now place the other washer 15/16 in the gas cylinder.

12 Photos Gallery of: Building Swivel Lounge Chair

Image of: White Swivel Lounge Chair
Image of: Swivel Lounge Chair Ideas
Image of: Round Swivel Lounge Chair
Image of: Modern White Swivel Lounge Chair
Image of: Modern Swivel Lounge Chair
Image of: Luxury Swivel Lounge Chair
Image of: Kinkou Swivel Lounge Chair
Image of: Copel Swivel Lounge Chair
Image of: Brown Swivel Lounge Chair
Image of: Black Swivel Lounge Chair
Image of: Best Swivel Lounge Chair
Image of: Awesome Swivel Lounge Chair
 
READ  Design of Oversized Living Room Chair

Swivel lounge chair slide the gas cylinder in the column of the saddle with the support kit previously attached to the gas cylinder. Apply the smallest washer kit at the bottom of the column of the saddle. Insert the clip included in the kit bracket in place at the bottom of the column of the saddle. Check to make sure it is firmly in place. Place the top of the lift on the column of the swivel chair. After mounting the chair column, you can slide the cover lifting on the column.

How to Build Swivel Lounge Chair

The basic elements to build a swivel lounge chair are simple. There are six parts main in a swivel chair. From then put all the pieces to make a complete chair will become a puzzle. Gather everything you need and if there is something that you have, you can buy at any hardware store. Grease the gas cylinder slightly and begins to assemble the kit bearing on the gas cylinder. There will be about six washers and have to grease them before you can fasten them to the gas cylinder.

READ  How to Design Armless Lounge Chair

Swivel lounge chair start with rubber pad and continues with washer 15/16 inches. Now place the bearing, which normally has five small balls. After placing bearing applicable about enough grease. Now, put the other washer 15/16 inch gas cylinder. Slide the gas cylinder in the back of the chair together with the bearing kit previously attached to the gas cylinder in step 1.

Place the smallest at the bottom of the column of the saddle washers. Introduces the hook kit including bearing in the lower part of the chair column. Check to make sure everything is in place. Place the lid on the column of the swivel lounge chair. After you have armed column of the chair, you can slide the lid on it.

READ  Make Cedar Adirondack Chairs from Planks